Automatic servo linear 6 cavity blow molding line
>>> Product Introduction:
FP-6000DS 6 cavity Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Our new design PET bottle machine with below high-tech can save 130000kwh electric one year for customer compare with normal linear four cavity blowing machine.
>>> Product Features:
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure the even distribution of heat, which improve the bottle shaping rate, increase the production.
4). High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
5). High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and noise.
7). Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
>>> Flow and Auxiliary machines:
HP Air Compressor → Air Tank → Air Filter → Air Dryer → Air Filter → Chiller → LP Air Compressor → Automatic Bottle Blowing Machine
1. Auxiliary Machine To operate this PET blowing machine, it also need some auxiliary machines. such as air compressor, air filter, air dryer, chiller and so on. we will equip the auxiliary machine according to your need.
2. Bottle Preform If you need, we can also help you find the bottle preform in china.
3. PET Bottle Mold Our PET blowing machine can produce various shape bottles. we can according to your need to design your own bottle and make mold for you.
4. Preform & Cap Molds We also can provide you with preform mold and cap mold according to your demand.
Specifications:
| | |
| | Applicable Preform Height/Neck | <330mm/25mm,28mm,30mm |
| Applicable Bottle Volume/Height/Diameter | Max.2Liter/Max.328mm/Max.105mm |
| Theoretical output | 9500-10000PCS/H(based on 500ml) |
| Applicable bottle body diameter | 20-92mm |
| Applicable bottle height | 50-350mm |
| | Install power | 51kw 380v 3Phase /220v 3Phase 50/60HZ |
| Heating oven power/Heating Oven operating power | 46kw/26kw |
| | Machine size | 3900*900*2500mm |
| Main machine weight | 3500Kg |
| Sorting machine/Loader | 2000*1500*1500mm/3000*1000*1500mm |
| Blowing Main machin | 3600*1600*2300mm |
| Blowing mould | 6 cavity |
Product Tags:
|
|
Pure Drink / Drinking / Drinkable Water Bottle Blow Moulding / Molder / Molding Machine / Equipment / Plant / System Images
|
